Call Us

01563 529435
Hire Hotline

0844 391 0201
Hypertherm Powermax45 XP

Hypertherm Powermax45 XP

  • Product Code:: ZA3345XP


One of the best-selling line of Powermax plasma systems, the Powermax45 XP delivers increased cut capacity – up to 16mm (5/8”) metal – as well as faster cut speeds, and automatic gas adjustment for quick, simple setup and operation. The 45XP can use either a single phase or three phase power supply dependent on your requirements. 

Part no. ZA3345XP


Small size and light weight provide exceptional portability for a 16 mm (5/8") rated cutting system

Patented drag-cutting technology makes the Powermax45 XP easy to use – even for first-time operators

Smart Sense™ technology ensures that air pressure is always correctly set

CNC interface and FastConnect™ torch connection allows both handheld and mechanized operation

A wide range of torch styles to choose from for both handheld and automated processes

Extensive array of application capabilities via specialty consumables for fine feature cutting, extended reach cutting,gouging, precision gouging, and marking

Finish jobs faster, with cut speeds 1.5 times greater than oxyfuel on 6 mm (1/4") mild steel

Superior cut and gouge quality reduces time for grinding and edge preparation

New torch disable switch feature allows faster, easier changeout of consumables

Duramax® Lock torches are designed for high-impact and heat resistance

SpringStart™ technology ensures consistent starting and optimum torch performance

Hypertherm Certified™ reliability ensures peak performance even in the most demanding environments

Plasma cutting efficiency is 11% better than its predecessor, enabling you to cut more steel with less power, in less time

All plasma system components are recyclable

14% lighter than its predecessor and delivers more cutting power

Input Voltages230 V, 1-PH, 50-60 Hz     OR   400 V, 3-PH, 50-60 Hz

Input Current @ 2.5kW230 V, 1-PH, 33A              OR    400V, 3-PH, 10A 
Output Current10-45A
Rated output voltage155 VDC
Duty Cycle 40°C (104°F)50% @ 45 A, 230 V, 1-PH
60% @ 41 A, 230 V, 1-PH
100%@ 32A, 230 V, 1-PH
50% @ 45 A, 400 V, 3-PH
60% @ 41 A, 400 V, 3-PH
100%@ 32A, 400 V, 3-PH
Open Circuit Voltage 265 VDC

Dimensions with handles442 mm (17.4") D; 173 mm (6.8") W; 357 mm (14.1") H
Weight w/ 4.5 (15') torchCSA: 14 Kg (31lbs)
CE, CCC: 15kg (33 lbs)
Input power cable length3 m (10')
Power supply typeInverter - IGBT
Engine drive requirement 12.5 kVA (10 kW) for full 45 A output

Write a review

Note: HTML is not translated!
    Bad           Good